BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Inceptra - ECPv6.8.2.1//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Inceptra
X-ORIGINAL-URL:https://inceptra.com
X-WR-CALDESC:Events for Inceptra
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:UTC
BEGIN:STANDARD
TZOFFSETFROM:+0000
TZOFFSETTO:+0000
TZNAME:UTC
DTSTART:20230101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=UTC:20240919T000000
DTEND;TZID=UTC:20240919T000000
DTSTAMP:20260404T235121
CREATED:20200321T170411Z
LAST-MODIFIED:20240919T192706Z
UID:10000112-1726704000-1726704000@inceptra.com
SUMMARY:WEBINAR:  Accelerate Antenna Design
DESCRIPTION:ON-DEMAND WEBINAR\n  \nImprove Product Design Processes & Reduce Costs with Virtual Prototyping\nIn a world where connectivity is key\, companies and people increasingly rely on antennas to communicate.  In fact\, antennas are the single most important electrical component to our daily lives as phones\, cars\, computers\, wearables and even medical devices completely rely on antennas to talk with each other.  The Internet of Things (IoT) has already completely revolutionized how we communicate and interact over the last decade\, and the electrification of all product designs will only continue to increase. \n  \n \nWatch Now \n  \nWatch this webinar to discover how Dassault Systèmes’ powerful electromagnetic field simulation software\, CST Studio Suite\, enables product engineers to digitally design\, analyze and optimize antennas of all shapes\, sizes and frequency\, before committing to physical prototypes. \nLearn about CST Studio Suite’s ease of use\, range and power and how it’s the only complete software solution for designing antennas – making it the best antenna design tool on the market today! \n  \nAntenna Design with CST Studio Suite\nWatch Now \n  \n\nPresenter Bio\nTracey Vincent is a CST expert with Inceptra and was a senior application engineer with CST for over seven years.  She has a combined Bachelor’s and Master’s Degree in Electrical and Electronic Engineering from Herriot-Watt University in Edinburgh\, Scotland and a Master’s degree from Napier University\, Scotland\, UK\, where she wrote an FEA program to solve fields in ferrimagnetic materials.  Tracey has ten years of experience as a radio frequency (RF) design engineer.  She completed her Ph.D. at WPI in Worcester\, MA\, in 2009\, where she investigated the effect of material topography on RF signal loss. \n\n 
URL:https://inceptra.com/event/webinar-accelerate-antenna-design-recording/
CATEGORIES:On-Demand Webinars
ATTACH;FMTTYPE=image/jpeg:/wp-content/uploads/2024/07/Antenna-Design-Webinar-smart-watch.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240919T000000
DTEND;TZID=UTC:20240919T000000
DTSTAMP:20260404T235121
CREATED:20200212T194845Z
LAST-MODIFIED:20240919T192708Z
UID:10000113-1726704000-1726704000@inceptra.com
SUMMARY:WEBINAR:  What Is Electromagnetic Simulation Used For?
DESCRIPTION:ON-DEMAND WEBINAR\n  \nAccelerate Your Product Design Cycle & Reduce Costs with Virtual Prototyping \nWe live in a technological world dominated by wireless communication\, ever faster digital speeds\, and increasing incidence of unwanted radiation – either in the form of biological absorption or electromagnetic interference (EMI).  To reduce the time and cost of bringing a product to market that uses these technologies\, product design engineers need an efficient and accurate electromagnetic (EM) simulation tool with a broad scope. \n  \n \nWatch Now \n  \nAnalysis with EM simulation software ranges from individual components such as antennas\, sensors and chips up to entire devices\, including aircraft\, smartphones and MRI.  EM simulation software reduces the time and cost of bringing a product to market not just in the high-tech industries of electronics and communication\, but also in aerospace\, defense\, transportation and life sciences. \n  \nWatch this webinar to discover how Dassault Systèmes’ powerful CST Studio Suite enables product engineers to design\, analyze and optimize electromagnetic components and systems\, before committing to physical prototypes.  Learn about integrating this easy to navigate EM analysis software package into the product development process from the earliest stages to accelerate the process of evaluating the performance\, reliability\, and safety of materials and products. \n  \nSee a demo of CST Studio Suite that will illustrate its ease of use\, range and power.  Electromagnetic field solvers for applications across the EM spectrum are contained within a single\, intuitive user interface\, allowing for a best-fit selection for the application at hand.  Simulation setup is straightforward and the ability to switch between solvers delivers the fastest setup and simulation while still achieving accurate results. \n  \nWatch Now \n  \n\nPresenter Bio\nTracey Vincent is a CST expert with Inceptra and was a senior application engineer with CST for over seven years.  She has a combined Bachelor’s and Master’s Degree in Electrical and Electronic Engineering from Herriot-Watt University in Edinburgh\, Scotland and a Master’s degree from Napier University\, Scotland\, UK\, where she wrote an FEA program to solve fields in ferrimagnetic materials.  Tracey has ten years of experience as a radio frequency (RF) design engineer.  She completed her Ph.D. at WPI in Worcester\, MA\, in 2009\, where she investigated the effect of material topography on RF signal loss. \n\n 
URL:https://inceptra.com/event/webinar-what-is-electromagnetic-simulation-used-for-recording/
CATEGORIES:On-Demand Webinars
ATTACH;FMTTYPE=image/png:/wp-content/uploads/2024/07/CST-Webinar_1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240919T000000
DTEND;TZID=UTC:20240919T000000
DTSTAMP:20260404T235121
CREATED:20191015T195414Z
LAST-MODIFIED:20240919T192710Z
UID:10000114-1726704000-1726704000@inceptra.com
SUMMARY:WEBINAR:  Easy-to-Use CFD Simulation for Product Engineers
DESCRIPTION:ON-DEMAND WEBINAR\n  \nMeet Product Design Goals Faster with Enhanced Virtual Testing \nProduct design engineers can now access the value of Computational Fluid Dynamics (CFD) simulation in a user experience that provides just what they need and speaks their language. Validate fluid and thermal performance to guide product design modifications early in the development cycle and explore innovative design concepts with comprehensive designer-level fluids simulation that does not require extensive specialist-level simulation knowledge. \n  \n \n\nWatch Now \n  \nWatch this webinar to discover how the Dassault Systèmes Fluid Dynamics Engineer role on the 3DEXPERIENCE platform enables users to quickly explore hundreds of designs while concurrently improving product performance based on criteria such as optimal flow distribution\, efficient thermal management\, minimal pressure losses\, flow uniformity\, reduced recirculation\, etc. \n  \nLeveraging industry standard RANS based finite volume CFD technology with a guided workflow and an easy-to-use interface\, this powerful fluid flow analysis solution allows users to build simulation models directly on the CAD geometry within a designer environment fully integrated with PLM. As simulation tasks and attributes are directly linked to the design\, simulation updates are easy to execute when the underlying design changes. \n  \nDesign engineers will want to view this webinar to learn about the advantages of the Fluid Dynamics Engineer solution: \n\nConduct trade-off studies early in the design process to meet product requirements\nSeamlessly navigate with the user assistant from model setup to results\nDefeature geometry using simulation model prep tools\nAutomatically selected turbulence models for internal and external steady state fluid flow\nHigh performance results visualization and automatic report generation\nIndustry standard RANS (Reynolds Averaged Navier-Stokes) based finite volume solver for steady state and low frequency flow\nAdvanced yet easy-to-use body-fitted Hex-Dominant Meshing (HDM) capability for complex geometry\nPatented Error estimator technology for accurate convergence reducing wasted iterations and solving faster\nFluid-Structure Interaction (FSI) and Conjugate Heat Transfer (CHT) multiphysics for modeling complex flow simulations with multiple domains\nConduct automated DOE/Optimization tasks with re-usable simulation processes and comprehensive result analytics to explore a larger design space for a true optimized design\n\n\nWatch Now
URL:https://inceptra.com/event/webinar-easy-to-use-cfd-simulation-for-product-engineers-recording/
CATEGORIES:On-Demand Webinars
ATTACH;FMTTYPE=image/jpeg:/wp-content/uploads/2024/07/Fluid-Dynamics-Engineer_with-border.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240919T000000
DTEND;TZID=UTC:20240919T000000
DTSTAMP:20260404T235121
CREATED:20190801T191113Z
LAST-MODIFIED:20240919T192711Z
UID:10000115-1726704000-1726704000@inceptra.com
SUMMARY:WEBINAR:  Easy-to-Use Structural Simulation for Product Engineers
DESCRIPTION:ON-DEMAND WEBINAR\n  \nMeet Product Design Goals Faster with Enhanced Virtual Testing \nYou don’t need to be an analyst to take advantage of the benefits that digital simulation can bring to product design and development – improved productivity\, reduced time to market\, optimal and durable products.  Product design engineers can now access comprehensive structural simulation tools within an intuitive user interface to assess the integrity of products under a wide range of loading conditions and guide design decisions. \n  \n \n  \nWatch Now \n  \nWatch this webinar to discover how the Dassault Systèmes Structural Professional Engineer role on the 3DEXPERIENCE platform offers multistep structural and thermal scenarios for virtual product performance and quality testing during the product design process. \n  \nDelivering state-of-the-art Abaqus simulation technology with a guided workflow and an easy-to-use interface\, this powerful structural analysis solution allows users to build simulation models directly on the CAD geometry within a designer environment fully integrated with PLM.  As simulation tasks and attributes are directly linked to the design\, simulation updates are easy to execute when the underlying design changes. \n  \nCATIA V5 Analysis users and design engineers will want to view this webinar to learn about the advantages of the Structural Professional Engineer solution: \n\nStructural nonlinear static\, frequency\, buckling\, modal dynamic response\, and structural thermal simulations of product designs\nAccuracy of the virtual testing ensured using state-of-the-art Abaqus simulation technology\nAssistant panel for quick assistance with setting up simulations\nAdvanced modeling and meshing capabilities\nMultistep structural and thermal scenarios\nHigh-performance results visualization capabilities\, particularly for very large models\nResults comparison and historization to facilitate assessment and impact of design changes\nSeamless design iterations based on simulation results\nCollaboration with product development stakeholders throughout the extended enterprise\n\n  \nWatch Now
URL:https://inceptra.com/event/webinar-easy-to-use-structural-simulation-for-product-engineers-recording/
CATEGORIES:On-Demand Webinars
ATTACH;FMTTYPE=image/jpeg:/wp-content/uploads/2024/07/DS-Structural-Professional-Engineer.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240919T000000
DTEND;TZID=UTC:20240919T000000
DTSTAMP:20260404T235121
CREATED:20190605T023851Z
LAST-MODIFIED:20240919T192713Z
UID:10000116-1726704000-1726704000@inceptra.com
SUMMARY:WEBINAR SERIES:  Digitalizing Product Design & Manufacturing Across the Enterprise
DESCRIPTION:ON-DEMAND WEBINARS\n  \nDigital Thread Webinar Series\nDassault Systèmes 3DEXPERIENCE Platform\n  \nEvery industry is transforming as organizations attempt to harness digital technologies to remain competitive and meet the demands of their customers. Dassault Systèmes’ 3DEXPERIENCE provides a unified business platform for engineering and manufacturing companies to directly address these emerging demands. The 3DEXPERIENCE platform digitally connects everyone in your organization\, simplifying the architecture and accelerating the product design and manufacturing process from ideation through to product delivery. \n 
URL:https://inceptra.com/event/webinar-series-digitalizing-design-and-manufacturing-across-the-enterprise_recording/
CATEGORIES:On-Demand Webinars
ATTACH;FMTTYPE=image/jpeg:/wp-content/uploads/2024/07/00-demo_spiral_8.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240913T000000
DTEND;TZID=UTC:20240913T000000
DTSTAMP:20260404T235121
CREATED:20240812T160525Z
LAST-MODIFIED:20240919T192110Z
UID:10000013-1726185600-1726185600@inceptra.com
SUMMARY:2024 Wichita CATIA RUG Aerospace & Defense-Fall Event
DESCRIPTION:Register for the 2024 CATIA Regional Users Group this September 13\, 2024 in Wichita\, KS!\n   \n  \nJoin us for the Aerospace & Defense Day of the 2024 Wichita CATIA Regional Users Group (RUG). This RUG will be focused on Wichita and surrounding companies using CATIA and the 3DEXPERIENCE® platform. We will have speakers from local companies\, as well as technical educational sessions from Dassault Systèmes and Inceptra. Come together to spark conversations\, meet\, network\, and learn from other expert users of CATIA in your community.   \n  \nThis is a FREE EVENT – Register TODAY! \n  \nWhen: September 13\, 2024 \nTime: 7:15 AM to 3:00 PM CT \nWhat: Engineering Design and Suppliers | Aerospace & Defense \nWhere: NIAR – WSU Tech North Campus National Center for Aviation Building 4004 N Webb Rd\, Wichita\, KS 67226 Directions   \n \n2024 Wichita CATIA RUG Aerospace & Defense Agenda\n  \nSeptember 13\, 2024\nEngineering\, Design\, and Suppliers  |  Aerospace & Defense\n  \n\n\n\n\n\nTime \n\n\nSession \n\n\nSpeaker \n\n\n\n7:15 AM – 8:00 AM\nCheck-in\n \n\n\n8:00 AM – 8:15 AM\nRUG Introduction and Welcome\nIrvin Vazquez\, Textron Aviation\n\n\n8:15 AM – 9:00 AM\nSession 1: What’s New in NC Programming with 3DEXPERIENCE\nRemy Boutin\, Dassault Systèmes\n\n\n9:00 AM –    10:00 AM\nSession 2: 3DEXPERIENCE Fasteners\nChad Ross\, Spirit Aerosystems\n\n\n10:00 AM – 10:45AM\nSession 3: Live DELMIA  3DEXPERIENCE Machining\nRemy Boutin\, Inceptra\n\n\n10:45 AM – 11:30 AM\nSession 4: OEM/Supplier Collaboration options on the 3DEXPERIENCE Platform\nJames Carr\, Inceptra\n\n\n11:30 AM – 12:25 PM\nCheck-in and Lunch\n \n\n\n12:25 PM – 12:30 PM\nRUG Welcome Back\n \n\n\n12:30 PM – 1:15 PM\nSession 1:  MBSE Approach for UAV Manufacturing\nXuan YI Lee\, WSU/NAR\n\n\n1:15 PM – 2:00 PM\nSession 2:  3DEXPERIENCE Producibility Review\nChad Ross\, Spirit Aerosystems\n\n\n2:15 PM – 3:00 PM\nSession 3: Round table Discussion for Questions   \nDassault Systèmes\, Inceptra\, Spirit AeroSystems\, WSU/NIAR\n\n\n3:00 PM\nMC164 (15 CPU) – End-to-End MBSE\nZhen Yang\, Dassault Systèmes\n\n\n3:00 PM\nMC165 (27 CPU) – Now that your V5 data is on the Platform\, how can you share it\nScott Pokriefka\, Dassault Systèmes\n\n\n3:00 PM\nMC166 (15 CPU) – Fastener App on-hands session\nRoger Joyal\, Dassault Systèmes\n\n\n\n\n  \n  \nRegistration is now closed. We look forward to seeing you in Wichita! \n\n 
URL:https://inceptra.com/event/2024-wichita-catia-rug-aerospace-defense-fall-event/
ATTACH;FMTTYPE=image/jpeg:/wp-content/uploads/2024/09/Wichita-2024-CATIA-RUG-Aerospace-Defense_pgbanner-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240912T000000
DTEND;TZID=UTC:20240912T000000
DTSTAMP:20260404T235121
CREATED:20240722T133908Z
LAST-MODIFIED:20240919T192111Z
UID:10000014-1726099200-1726099200@inceptra.com
SUMMARY:Inceptra Customer Appreciation Golf Outing 2024 – Kansas
DESCRIPTION:  \nWe are thrilled to bring back our annual golf outing in Kansas!  To express our appreciation\, Inceptra and Dassault Systèmes invite customers to join us for the 2024 Inceptra Customer Golf Outing to be held at: \n  \nAuburn Hills Golf Course\nWichita\, Kansas\nThursday\, September 12\, 2024\n  \n8:00 am Continental Breakfast \n9:00 am Shotgun Start – Scramble Format \nLunch Served & Prizes Awarded Following Golf Game \n  \n  \nAuburn Hills Golf Course\n443 S 135th St W\nWichita\, KS 67235\nP (316) 219-9700 \nDirections \n  \n**When registering other guests for your group please\, include their full first and last name\, company email\, and their company phone number. Thank you!** \n\n 
URL:https://inceptra.com/event/inceptra-customer-appreciation-golf-outing-2024-kansas/
ATTACH;FMTTYPE=image/jpeg:/wp-content/uploads/2024/09/Inceptra-Kansas-Golf-Outing_2024-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240821T000000
DTEND;TZID=UTC:20240821T000000
DTSTAMP:20260404T235121
CREATED:20240722T125215Z
LAST-MODIFIED:20240919T192111Z
UID:10000015-1724198400-1724198400@inceptra.com
SUMMARY:Inceptra Customer Appreciation Golf Outing 2024 – Michigan
DESCRIPTION:  \nAfter a pandemic induced hiatus\, we are thrilled to bring back our annual golf outing in Michigan!  To express our appreciation\, Inceptra and Dassault Systèmes invite customers to join us for the 2024 Inceptra Customer Golf Outing to be held at: \n  \nMoose Ridge Golf Course\nSouth Lyon\, Michigan\nWednesday\, August 21\, 2024\n  \n8:00 am Continental Breakfast \n9:00 am Shotgun Start – Scramble Format \nLunch Served & Prizes Awarded Following Golf Game \n  \n  \nMoose Ridge Golf Course\n11801 Doane Road\nSouth Lyon\, Michigan 48178\nP (248) 446-9030 \nDirections \n  \n**When registering other guests for your group please\, include their full first and last name\, company email\, and their company phone number. Thank you!** \n\n 
URL:https://inceptra.com/event/inceptra-customer-appreciation-golf-outing-2024-michigan/
ATTACH;FMTTYPE=image/jpeg:/wp-content/uploads/2024/09/Inceptra-Golf-Outing_2024-1.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240720T000000
DTEND;TZID=UTC:20240721T000000
DTSTAMP:20260404T235121
CREATED:20240702T144137Z
LAST-MODIFIED:20240919T192111Z
UID:10000016-1721433600-1721520000@inceptra.com
SUMMARY:Vertical Flight Society's 18th Annual Electric Aircraft Symposium
DESCRIPTION:Register for the 18th Annual Electric Aircraft Symposium this July 20-21\, 2024 in Oshkosh\, WI!\n  \n \n  \nRegister Now \n  \nThe Vertical Flight Society’s 18th Annual Electric Aircraft Symposium will be both online and in person at the University of Wisconsin Oshkosh’s Culver Family Welcome Center in Oshkosh\, WI\, July 20-21\, 2024. Taking place before Experimental Aircraft Association (EAA) AirVenture 2024. \nOver 40 of the world’s foremost electric aircraft developers and technology experts will be speaking at the 18th Annual Electric Aircraft Symposium (EAS). This event is brought to you by the Vertical Flight Society (VFS). \nEAS offers a unique opportunity to network with leaders in Advanced Air Mobility (AAM) at an intimate conference by industry technical leaders. \nThe annual Electric Aircraft Symposium is the leading event for electric VTOL/STOL/CTOL and AAM. Arrive early in Oshkosh to discover the latest advancements in electric aviation! \n  \nCheck out the AGENDA \n  \nDon’t miss Inceptra’s Technical Briefing \nJuly 21\, 2024 | 1:00 pm – 1:30 pm \nManaging Certification Requirements & Traceability\nTo reach the type certificate and permission to fly\, you must demonstrate to certification authorities that safety conditions are met. Not only is it necessary to prove that mandatory performance is met\, but it is also necessary to justify how the conclusion was built. \nTherefore\, traceability between regulations\, requirements\, and design solutions must be in place as early as the engineering activities start. \nA single source of truth helps companies to benefit from the digital continuity of data. It also keeps the design intent clear to certification authorities. \nPresented by:  Dan Dunne\, Vice President Engineering\, Inceptra\n  \nRegister Now \n 
URL:https://inceptra.com/event/vfs-18th-annual-electric-aircraft-symposium/
ATTACH;FMTTYPE=image/jpeg:/wp-content/uploads/2024/07/18th-Annual-Electric-Aircraft-Symposium_pgbanner.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240529T000000
DTEND;TZID=UTC:20240530T000000
DTSTAMP:20260404T235121
CREATED:20240116T162213Z
LAST-MODIFIED:20240919T192113Z
UID:10000017-1716940800-1717027200@inceptra.com
SUMMARY:In-Person Seminar New Space Insights
DESCRIPTION:New Space Revolution: Join the Movement!\nTransition into the entrepreneurial space age—New Space—where strides made over the years are now expanding at an unprecedented pace\, breaking free from government agencies’ exclusive domain. The commercial space industry\, driven by private organizations\, is making colossal advancements in tourism\, exploration\, and satellite technology. \n \nWitness the disruption caused by innovative start-ups and SMEs\, captivating investor imagination. Rapid innovation becomes the cornerstone\, ensuring alignment with market demand and emphasizing the need to get it right from the outset. \nMega-Constellations: Revolutionizing with Small Satellites\nSmallsats\, weighing under 1\,320 lb (600 kg)\, are pivotal contributors\, representing three-quarters of the $348 billion in space activity revenues. The imminent constellations are poised to introduce 40\,000 satellites into Low Earth Orbit\, reshaping industry dynamics and ushering in new frontiers for innovation. \nExploration: From Vision to Reality\nPrivate companies lead the charge in accessible space travel\, igniting unprecedented investment. With suborbital flights and ambitious plans for lunar and Martian exploration\, the industry propels towards new horizons\, capturing imaginations and turning dreams into reality. \nRocketry & Satellite Design: Accelerating Innovation\nThe right business platform fuels satellite technology innovation. Shortened development times ensure successful launches\, with collaboration\, integration\, and digital capabilities driving the industry forward. \nProgram Excellence: Optimizing Launch Success\nThe Program Excellence platform ensures more than timely deliveries; it enhances program management performance\, fostering increased revenue and setting the stage for a future where launch success is the norm.   \n\n \nAgenda  |  May 29th and 30th\n  \n\n\n\n\n\nTime \n\n\nSession \n\n\nSpeaker \n\n\n\n7:15 – 8:00 AM\nCheck-in and Breakfast\n \n\n\n8:00 – 8:20 AM\nDassault Systèms Perspective on the New Space Economy and Unique Ability to Empower Success Across the Space Industry\nLauren Cooper\, Dassault Systèmes\n\n\n8:30 – 8:50 AM\nIntroduction to 3DEXPERIENCE:  An end-to-end solution for the New Space industry\nJason Curtis\, Inceptra\n\n\n8:50 – 9:35 AM\nDemonstration: Model-based Systems Engineering with Cameo\nJeremy Loveland\, Inceptra\n\n\n9:35 – 9:50 AM\nBreak\n \n\n\n9:50 – 10:50 AM\nDemonstration: Electro-magnetic/RF Simulation with CST\nDmitry Grudin\, Inceptra\n\n\n10:50 – 11:30 AM\nDemonstration: MBOM\, Production Planning\, Work Instructions on 3DEXPERIENCE\nJason Curtis\, Inceptra\n\n\n11:30 – 11:45 AM\nWrap up\nBill Gratzek\, Inceptra\n\n\n11:45 AM – 1:00 PM\nCatered Lunch\n \n\n\n\n\n  \nJoin the New Space Revolution!\nExplore\, innovate\, and be part of the New Space era reshaping the future. Whether startup\, SME\, or industry leader\, find tools and solutions to propel your space endeavors. Join our in-person seminar to delve into the dynamic landscape\, innovations\, and investment opportunities shaping the New era—The cosmos awaits! \nStart time: 8:00 AM – 12:00 PM MST \nMay 29th\, 2024\, OMNI Interlocken – 500 Interlocken Blvd.\, Broomfield\, CO 80021 \nMay 30th\, 2024\, Great Wolf Lodge – 9494 Federal Drive Colorado Springs\, CO 80921   \n 
URL:https://inceptra.com/event/in-person-new-space-insights/
ATTACH;FMTTYPE=image/jpeg:/wp-content/uploads/2024/07/LIVE-New-Space-Insights-Webinar_LP.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240513T000000
DTEND;TZID=UTC:20240516T000000
DTSTAMP:20260404T235121
CREATED:20240425T185927Z
LAST-MODIFIED:20240919T192112Z
UID:10000018-1715558400-1715817600@inceptra.com
SUMMARY:2024 MBSE Cyber Systems Symposium MCSS
DESCRIPTION:MBSE Cyber Systems Symposium MCSS 2024 is this May in Dallas\, TX – Register NOW!\n  \n \n  \nRegister Now \n\n  \n2024 MBSE Cyber Systems Symposium MCSS\nMay 13-16\, 2024\nSheraton Dallas Hotel\nDowntown Dallas\, Texas\nVisit Inceptra at booth M110 – Grand Hall \nStay Updated on Latest Technologies\nExplore advancements in MBSE/SysML\, PLM\, PLE\, Modeling\, Enterprise Architecture\, Business Architecture\, BPMN\, Concept Modeling\, and Ontology. \n  \nJoin the CATIA MBSE Cyber Systems Community\nConnect with CATIA systems engineering enthusiasts\, including No Magic solutions like CATIA Magic\, Cameo\, MagicGrid\, and DYMOLA. \n  \nDiscover Solutions and Technologies\nMaximize your time with Demo Street\, Demo Theater\, and tutorials in Enterprise Architecture\, MBSE\, PLM\, and Simulation. \nBenefit from Valuable Training Sessions\nAccess live demonstrations\, exhibitions\, and over fifty interactive sessions. \nEngage with the Community\nLearn about collaborative efforts between No Magic\, CATIA\, customers\, and partners to integrate innovation into solutions. \nNetwork and Collaborate\nConnect with leading practitioners across industries and engage with experts in modeling\, MBSE\, PLM\, PLE\, Ontology\, UAF\, and UPDM.
URL:https://inceptra.com/event/2024-mbse-cyber-systems-symposium-mcss/
ATTACH;FMTTYPE=image/jpeg:/wp-content/uploads/2024/07/2024_MBSE-Cyber-Systems-Symposium-MCSS_pgbanner.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240513T000000
DTEND;TZID=UTC:20240516T000000
DTSTAMP:20260404T235121
CREATED:20240424T233245Z
LAST-MODIFIED:20240919T192112Z
UID:10000019-1715558400-1715817600@inceptra.com
SUMMARY:2024 COExperience
DESCRIPTION:Register for COExperience 2024 this May in Dallas\, TX!\n  \n \n  \nRegister Now \nSave 20% – register using the special Inceptra discount code: INCEPTRA20OFF \n  \nJoin us in Dallas\, Texas\, from May 13-16\, 2024\, booth C26\, for a unique convergence of innovation and collaboration. The 2024 COExperience and MBSE Cyber Systems Symposium are coming together at the Dallas Sheraton Hotel\, offering a dynamic platform for Dassault Systèmes users. \nAttendees can look forward to specialized content tailored to their interests\, networking opportunities\, and engaging keynote presentations. Plus\, don’t miss the chance to interact with Dassault Systèmes executives and product experts at evening events. \nDiscover cutting-edge insights at COExperience\, exploring Dassault Systèmes’ portfolio of solutions\, while the MBSE Cyber Systems Symposium delves into topics like MBSE/SysML\, PLM\, and Enterprise Architecture. \n  \nDon’t miss Inceptra’s presentation – May 16\, 2024 | 3:30 pm – 4:20 pm: \n3DEXPERIENCE® Usability Enhancements\nLearn about usability challenges encountered across various applications and industries during 3DEXPERIENCE implementations and how they were addressed by Inceptra through building extensions and widgets to improve usability and user productivity. \nThis presentation will cover real-world usability enhancement examples for the following industry processes: part numbering and document number generators\, drawing watermarking\, shop floor analytics\, pending tasks workflow & impact analysis. \nPresented by:  Vik Paranjpe\, Director Consulting Services\, Inceptra
URL:https://inceptra.com/event/2024-coexperience/
ATTACH;FMTTYPE=image/jpeg:/wp-content/uploads/2024/07/2024_COExperience_pgbanner.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240507T000000
DTEND;TZID=UTC:20240509T000000
DTSTAMP:20260404T235121
CREATED:20240410T192738Z
LAST-MODIFIED:20240919T192112Z
UID:10000020-1715040000-1715212800@inceptra.com
SUMMARY:The Vertical Flight Society's 80th Annual Forum & Technology Display
DESCRIPTION:The Future of  Vertical Flight\n  \n \n  \nRegister Now \n  \nThe 80th Annual Forum & Technology Display organized by The Vertical Flight Society stands as the premier global technical gathering focusing on vertical flight technology. Over the course of three days\, attendees will engage with a comprehensive program featuring 250+ technical papers covering diverse fields from Acoustics to Test & Evaluation. \nAdditionally\, esteemed leaders from military\, government agencies\, and industry will deliver invited presentations and lead discussions. Forum 80 will be held in-person on May 7-9\, 2024 at the Palais des Congrès de Montréal in Montréal\, Québec\, Canada \nIn addition to the Forum\, running parallel is the Technology Display\, which offers an unprecedented showcase of cutting-edge vertical flight technologies alongside broader aerospace innovations. Leading manufacturers\, service providers\, defense agencies\, universities\, and research organizations will unveil the latest advancements in vertical flight technology within our exhibit hall. \n  \nDon’t miss Inceptra’s Technical Briefing at Booth 720 \nWednesday\, May\, 8th\, 2024 | 3:30 pm – 4:00 pm: \nAccelerating VTOL Aircraft Development from Concept to Certification\nDiscover Dassault Systèmes’ “Reinvent the Sky” industry solution tailored for startups\, small to medium enterprises\, and OEMs aiming to accelerate the design\, prototyping\, and certification of VTOL aircraft. \nOperating in the cloud\, this solution reduces IT-related costs while enhancing collaboration. Furthermore\, it encompasses industry process experiences and offers the same suite of product design\, simulation\, manufacturing\, and PLM apps utilized by leading aircraft manufacturers worldwide. \nAs a result of  leveraging a unified product innovation platform\, it streamlines development processes\, minimizing inefficiencies and ensuring high product quality. This approach significantly shortens the time from concept to flight\, requiring fewer resources\, and guarantees full data traceability essential for certification. \nPresented by:  Martin Roy\, Applications Engineer\, Inceptra\n  \nRegister Now \n  \n 
URL:https://inceptra.com/event/vfs-80th-annual-forum-technology-display/
ATTACH;FMTTYPE=image/jpeg:/wp-content/uploads/2024/07/VFS-80th-Annual-Forum-pgbanner.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240430T000000
DTEND;TZID=UTC:20240502T000000
DTSTAMP:20260404T235121
CREATED:20240425T202541Z
LAST-MODIFIED:20240919T192112Z
UID:10000021-1714435200-1714608000@inceptra.com
SUMMARY:2024 SIMULIA Americas Users Conference
DESCRIPTION:Register for 2024 SIMULIA Americas Users Conference SAUC this May in Novi\, MI!\n  \n \n  \nRegister Now \nThis is a FREE event – Register TODAY! \n  \nThe 2024 SIMULIA Americas Users Conference (SAUC) will return to Novi\, Michigan\, April 30\, 2024\, and will be held entirely in person at the Suburban Collection Showplace. \nHear from customers\, industry leaders\, and SIMULIA Technical Experts. This In-Person only conference is free to attend and combines all parts of the Regional User Meetings into one Americas-wide event. \nConnect with engineers from all industries\, as they come together to spark conversations\, network and get creative juices flowing. Register for advanced seminars\, workshops\, and discussion groups on Tuesday\, April 30. Guess what – they’re free\, too! Register Now! \n  \nKeynote Presenters\n\nSaurabh Bahuguna\, General Motors\nJameson Fee\, Celanese\nDr. Suzanne Ferreri\, BD\nGeorge Karniadakis\, Brown University\nAli Marzban\, NOV\nFaisal Sayeed\, General Motors\nMark Taylor\, The Boeing Company\n\n  \nDassault Systèmes Presenters\n\nSebastien Gautier\nRamji Kamakoti\nVictor Oancea
URL:https://inceptra.com/event/2024-simulia-americas-users-conference/
ATTACH;FMTTYPE=image/jpeg:/wp-content/uploads/2024/07/2024-SIMULIA-Americas-Users-Conference_pgbanner.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240417T000000
DTEND;TZID=UTC:20240418T000000
DTSTAMP:20260404T235121
CREATED:20240320T152345Z
LAST-MODIFIED:20240919T192112Z
UID:10000022-1713312000-1713398400@inceptra.com
SUMMARY:2024 Wichita CATIA RUG Aerospace & Defense
DESCRIPTION:Register for the CATIA Regional Users Group this\nApril 17th – 18th\, 2024 in Wichita\, KS!\n   \n  \nConnect with us at the Aerospace & Defense Day during the 2024 Wichita CATIA Regional Users Group (RUG). This event will spotlight Wichita and neighboring companies utilizing CATIA and the 3DEXPERIENCE® platform. Anticipate presentations from local industry leaders and technical workshops hosted by Dassault Systèmes and Inceptra. Join us to initiate discussions\, connect\, network\, and gain insights from fellow CATIA experts in your community. \n  \nThis is a FREE EVENT – Register TODAY! \n  \nWhen: April 17th and 18th\, 2024 \nWhat: Engineering and 3DEXPERIENCE \n            Manufacturing and 3DEXPERIENCE | Aerospace & Defense \nWhere: NIAR – WSU Tech North Campus \nNational Center for Aviation Building \n4004 N Webb Rd\, \nWichita\, KS 67226 \nDirections   \n \n2024 Wichita CATIA RUG Aerospace & Defense Agenda\n  \nApril 17\, 2024\nEngineering and 3DEXPERIENCE  |  Aerospace & Defense\n  \n\n\n\n\n\nTime \n\n\nSession \n\n\nSpeaker \n\n\n\n11:30 AM – 12:15 PM\nCheck-in/Lunch\nSponsored byDassault Systèmes\n\n\n12:15 PM – 12:30 PM\nRUG Introduction and Welcome\nDassault Systèmes\n\n\n12:30 PM – 1:00 PM\n\nSession 1: Integrated Modeling and Simulation for Aerospace and Defense \n\nPat O’Heron\, Dassault Systemes\n\n\n1:00 PM – 1:45 PM\n\nSession 2: MBSE approach for UAV manufacturing \n\nXuan Yi\, WSU/NIAR\n\n\n1:45 PM – 2:45 PM\n\nSession 3: CATIA V5 Knowledge Team \n\nTory Whitcomb\, Spirit AeroSystems\n\n\n2:45 PM – 3:00 PM\nBreak\n \n\n\n3:00 PM – 3:45 PM\n\nSession 4: Fasteners – VE lessons learned \n\nChad Ross\, Spirit AeroSystems\n\n\n3:45 PM – 4:30 PM\n\nSession 5: What’s New in 2024x 3DEXPERIENCE \n\nChris DeVries\, Dassault Systèmes\n\n\n4:30 PM – 5:30 PM\n\nNetworking \n\n \n\n\n\n\n  \nApril 18\, 2024\nManufacturing and 3DEXPERIENCE  |  Aerospace & Defense\n  \n \n\n\n\n\n\nTime \n\n\nSession \n\n\nSpeaker \n\n\n\n7:15 AM – 8:00 AM\nCheck-in/Breakfast\nSponsored by Inceptra\n\n\n8:00 AM – 8:15 AM\nRUG Introduction and Welcome\nDassault Systèmes\n\n\n8:15 AM – 8:45 AM\n\nSession 1: What’s New in NC Programming with 3DEXPERIENCE \n\nRemy Boutin\, Inceptra\n\n\n8:45 AM –    9:30 AM\n\nSession 2: Advantages of the platform and CATIA V5 NC \n\nRemy Boutin and James Carr\, Inceptra\n\n\n9:30 AM – 10:15AM\n\nSession 3: MBOM and Process Planning \n\nDassault Systèmes\n\n\n10:15 AM – 10:30 AM\nBreak\n \n\n\n10:30 AM – 11:15 AM\n\nSession 4: Cloud- ITAR Compliance \n\nAllen Kerbow\, Dassault Systèmes\n\n\n11:15 AM – 12:30 PM\n\nSession 5: Data Exchange Round table \n\nInceptra\, DS\, Spirit\, Textron\, Airbus\, WSU/NIAR\, etc.\n\n\n\n\n \n \nWe look forward to seeing you at the event!   \n 
URL:https://inceptra.com/event/2024-wichita-catia-rug-aerospace-defense/
ATTACH;FMTTYPE=image/jpeg:/wp-content/uploads/2024/07/2024-Wichita-CATIA-RUG-pgbanner.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240326T000000
DTEND;TZID=UTC:20240326T000000
DTSTAMP:20260404T235121
CREATED:20240305T143222Z
LAST-MODIFIED:20240919T192112Z
UID:10000023-1711411200-1711411200@inceptra.com
SUMMARY:Symposium canadien sur la maintenance navale
DESCRIPTION:Symposium canadien sur la maintenance navale – Canadian Naval Maintenance Symposium\nThe Canadian Naval Maintenance Symposium 2024 is a flagship event where innovation\, expertise\, and collaboration converge within the maritime industry. \nThe Canadian Naval Maintenance Symposium stands as the foremost gathering for professionals\, researchers\, and industry leaders within the maritime sector. It serves as a pivotal platform for knowledge exchange\, discourse on emerging trends\, and exploration of innovative solutions in naval maintenance and operations. \n \nThis year\, features an unparalleled panel comprising Canada’s premier shipyards\, offering insights into their latest accomplishments\, challenges\, and solutions in ship maintenance. This exclusive opportunity provides a behind-the-scenes look at major projects and the technologies driving our sector forward. \nRegister Now \nThe presence of esteemed dignitaries and high-level representatives\, including the Canadian Coast Guard\, the Royal Canadian Navy\, THALES\, the Société des ferry du Québec\, and Services Public and Procurement Canada\, underscores the significance of this event. Their participation reaffirms the ongoing commitment to excellence and sustainable development in fleet maintenance. \nMore than just an event\, the Canadian Naval Maintenance Symposium 2024 serves as a knowledge platform\, a catalyst for strategic partnerships\, and a showcase for industry excellence. \nEvent Details:\nDate: March 26\, 2024 \nTime: 7:00 AM \nLocation: 6500 Boul. de Rome\, Brossard\, J4Y 0B6 \n\n  \nKey Features::\n\nExpert Speakers: Gain insights from renowned experts and thought leaders in the field of naval maintenance.\nTechnical Sessions: Explore cutting-edge research and developments through a series of technical presentations.\nNetworking Opportunities: Connect with professionals\, researchers\, and industry stakeholders to build valuable relationships and collaborations.\n\n  \nWho Should Attend?\nThe symposium is ideal for professionals\, researchers\, and students interested in naval maintenance\, including: \n\nNaval engineers and technicians\nShipyard personnel\nMaritime industry professionals\nAcademics and researchers\nGovernment officials and policymakers\n\n  \nWhy Attend?\nStay Informed: Stay up-to-date with the latest advancements and trends in naval maintenance. \nNetworking: Expand your professional network and connect with peers and experts in the field. \nProfessional Development: Enhance your skills and knowledge through technical sessions. \n  \nRegistration:\nDon’t miss out on this invaluable opportunity! Secure your spot today by registering for the Canadian Naval Maintenance Symposium. \n  \nRegister Now \n\nContact Us:\nInceptra’s Patrick L’Heureux will be onsite to share how our solutions can resolve complexities organizations face in the Marine & Offshore industry.
URL:https://inceptra.com/event/symposium-canadien-sur-la-maintenance-navale/
ATTACH;FMTTYPE=image/jpeg:/wp-content/uploads/2024/07/Symposium-canadien-sur-la-maintenance-navale-pgbanner.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240206T000000
DTEND;TZID=UTC:20240206T000000
DTSTAMP:20260404T235121
CREATED:20240105T205411Z
LAST-MODIFIED:20240919T192113Z
UID:10000024-1707177600-1707177600@inceptra.com
SUMMARY:WEBINAR: 3DCS Variation Analyst
DESCRIPTION:ON-DEMAND WEBINAR\nInceptra and 3DCS present – Optimize Manufacturing Quality with 3DCS Variation Analyst\n  \nStep into the forefront of manufacturing innovation with 3DCS Variation Analyst! Trusted globally as the industry’s leading software and seamlessly integrated into 3DEXPERIENCE; 3DCS\, a recognized Dassault Systèmes Gold Partner\, empowers you to unleash unparalleled manufacturing excellence. Gain the power to not only control variation but also optimize designs with precision\, ensuring tolerance optimization and cutting costs. \n  \n \n  \nWatch NOW \n  \nMoreover\, with three advanced simulation methods\, 3DCS identifies sources\, highlights build issues\, and propels your product development with digital prototypes for rigorous testing and validation. Elevate precision\, reduce rework\, and enhance collaboration effortlessly. \nJoin our LIVE Webinar with Michael Pritchard\, Senior Sales Executive\, and Gerhard (Gary) Bell\, Engineer from 3DCS. Discover how 3DCS Variation Analyst\, integrated into 3DEXPERIENCE\, enhances manufacturing quality. Control variation\, optimize designs\, and reduce costs through precise simulation. Gain insights and automate measurement plans for superior results. \nEmbark on the journey into the future of manufacturing with 3DCS – where innovation seamlessly meets industry standards! \n  \nWatch NOW
URL:https://inceptra.com/event/webinar-3dcs-variation-analyst/
CATEGORIES:On-Demand Webinars
ATTACH;FMTTYPE=image/jpeg:/wp-content/uploads/2024/07/3DCS-LIVE-Webinar_LP.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20231128T000000
DTEND;TZID=UTC:20231130T000000
DTSTAMP:20260404T235121
CREATED:20231113T145526Z
LAST-MODIFIED:20240919T192113Z
UID:10000025-1701129600-1701302400@inceptra.com
SUMMARY:2023 Carbon Fiber Conference
DESCRIPTION:Join us for CompositesWorld’s Conference this November 28-30\, 2023\, in Salt Lake City\, UT!\n  \nSecure your spot now and prepare for an inspiring journey into the world of carbon fiber\, innovation\, and endless possibilities. Moreover\, don’t miss out on this unique opportunity to shape the future of the composites industry. \n  \n \nWhen registering make sure to use code INCEPTRA so\, that we know you’re attending and can connect with you. \nRegister Now \n  \nCarbon Fiber 2023: Revolutionizing the Composites Industry\nCarbon Fiber Conference 2023\, presented by CompositesWorld is your gateway to the cutting-edge world of carbon fiber and its ever-expanding role in the composites industry. \n\nWhy Carbon Fiber 2023?\nDiscover the Future: Dive into the forefront of carbon fiber technology and innovation. Learn how this material is reshaping industries and pushing the boundaries of what’s possible. \nExpert Insights: Connect with industry experts who will guide you through strategies for streamlining manufacturing costs\, provide market outlooks and forecasting\, and offer invaluable insights into this dynamic field. \nNetwork with Pioneers: Rub shoulders with the most innovative and influential leaders in the carbon fiber and composites industry. Forge connections that can transform your business and career. \n\nWhat to Expect Carbon Fiber 2023\nAdvanced Design and Automation: Engage in discussions that focus on advanced design and automation processes. Unlocking the potential to reduce manufacturing costs while maintaining quality\, companies can implement streamlined processes and enhance overall efficiency. \nMarket Growth Outlook: Gain a comprehensive understanding of market dynamics\, consumption trends\, and future growth potential in industries where carbon fiber plays a pivotal role. \nExplore the world of composites and visit Inceptra’s Booth #125 to meet Bill Gratzek and Nobletek. Discover the possibilities Inceptra can offer your business! \n  \nThis event will be held at the: \nLittle America Hotel\n500 Main St\nSalt Lake City\, UT\n84101\nTel: +1801-596-5700 \nClick here to view the Agenda \n  \nWhen registering make sure to use code INCEPTRA so\, that we know you’re attending and can connect with you. \nRegister Now
URL:https://inceptra.com/event/2023-carbon-fiber-conference/
ATTACH;FMTTYPE=image/jpeg:/wp-content/uploads/2024/07/2023-Carbon-Fiber-Event_Salt-Lake-City_Utah-pg-banner.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20231106T000000
DTEND;TZID=UTC:20231107T000000
DTSTAMP:20260404T235121
CREATED:20231025T192148Z
LAST-MODIFIED:20240919T192113Z
UID:10000026-1699228800-1699315200@inceptra.com
SUMMARY:Rendez-vous de la chaine d’approvisionnement de la construction navale du Québec
DESCRIPTION:L’AFCDC invite à son grand événement annuel\nEnglish \n  \n\n \n  \nInscrivez-Vous \n  \nLe Rendez-vous de la chaine d’approvisionnement de la construction navale du Québec se tiendra en personne au Centre des Congrès de Lévis\, à Lévis\, Québec\, les 6 et 7 novembre 2023. \nCette rencontre attire des experts de tous les secteurs de la construction navale. Il attire également les donneurs d’ordre et les grands fournisseurs du domaine maritime. Profitez de cette opportunité de réseautage et de dialogue avec un auditoire captif de hauts fonctionnaires\, de délégations internationales et de décideurs clés de l’industrie navale québécoise et canadienne. \nVisitez Inceptra et Dassault Systèmes au stand n°36 pour en savoir plus sur les Program Excellence For Sea\, Design For Sea de Dassault Systèmes et d’autres solutions qui peuvent aider votre entreprise à prospérer en mer. \n  \nLibérez une nouvelle vague de collaboration\n  \n\nhttps://www.inceptra.com/wp-content/uploads/2023/10/DassaultSystem_MandO_Industry_intro1.mp4 \n  \nDans le monde compétitif du Marine & Offshore\, il existe un besoin pressant de connectivité de bout en bout. L’industrie est prête pour une transformation numérique. La plateforme 3DEXPERIENCE® intègre de manière transparente les processus de conception\, d’ingénierie\, de simulation\, de fabrication et commerciaux. \nLe programme Excellence For Sea simplifie le développement des actifs marins et répond aux défis liés à la livraison de navires complexes. Il améliore également la gouvernance des projets\, favorise la collaboration\, assure la continuité numérique et améliore l’efficacité opérationnelle. De plus\, il met l’accent sur l’exploitation des programmes antérieurs pour la modularité\, le contrôle des coûts et l’amélioration de la qualité\, permettant un suivi en temps réel des objectifs commerciaux. \nDesigned For Sea permet aux architectes\, concepteurs et ingénieurs navals de créer et de valider des conceptions avec une traçabilité complète. Il établit des liens entre les équipes et permet d’explorer des scénarios alternatifs grâce à une simulation 3D avancée pour l’excellence de la conception.
URL:https://inceptra.com/event/afcdc-french/
ATTACH;FMTTYPE=image/jpeg:/wp-content/uploads/2024/07/Quebec-Shipbuilding-Supply-Chain-pg-banner.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20231106T000000
DTEND;TZID=UTC:20231107T000000
DTSTAMP:20260404T235121
CREATED:20231024T153111Z
LAST-MODIFIED:20240919T192113Z
UID:10000027-1699228800-1699315200@inceptra.com
SUMMARY:Annual Meeting of the Quebec Shipbuilding Supply Chain
DESCRIPTION:Register for AFCDC’s Major Annual Naval Sector Event\nFrançais \n  \n \n  \nRegister Now \n  \nThe Annual Meeting of the Quebec Shipbuilding Supply Chain is the Association des Fournisseurs de Chantier Davie Canada AFCDC’s premier annual event. The meeting will be held in-person at the Lévis Convention Center in Lévis\, Quebec\, November 6-7\, 2023. \nThe event attracts experts from all sectors of the shipbuilding industry. It also attracts prime contractors and major suppliers in the maritime field. Take advantage of this opportunity to network and dialogue with a captive audience of senior government officials\, international delegations and key decision-makers in the Quebec and Canadian shipbuilding industry. \nVisit Inceptra and Dassault Systèmes at booth #36 to learn more about the Program Excellence for Sea\, Design for Sea and other solutions that can help your business thrive at sea. \n  \nUnleash a New Wave of Collaboration\n  \nhttps://www.inceptra.com/wp-content/uploads/2023/10/DassaultSystem_MandO_Industry_intro1.mp4 \n  \nIn the competitive world of Marine & Offshore\, there’s a pressing need for end-to-end connectivity. The industry is ready for a digital transformation. The 3DEXPERIENCE® platform seamlessly integrates design\, engineering\, simulation\, manufacturing\, and business processes. \nThe Program Excellence For Sea simplifies marine asset development and addresses challenges in delivering complex ships. It also enhances project governance\, fosters collaboration\, ensures digital continuity\, and improves operational efficiency. Additionally\, it emphasizes leveraging past programs for modularity\, cost control\, and quality enhancement\, enabling real-time monitoring of business goals. \nDesigned For Sea empowers naval architects\, designers\, and engineers to create and validate designs with complete traceability. It also establishes connections among teams and enables exploration of alternative scenarios through advanced 3D simulation for design excellence.
URL:https://inceptra.com/event/annual-meeting-of-the-quebec-shipbuilding-supply-chain/
ATTACH;FMTTYPE=image/jpeg:/wp-content/uploads/2024/07/Quebec-Shipbuilding-Supply-Chain-pg-banner.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20231017T000000
DTEND;TZID=UTC:20231017T000000
DTSTAMP:20260404T235121
CREATED:20230919T202515Z
LAST-MODIFIED:20240919T192114Z
UID:10000028-1697500800-1697500800@inceptra.com
SUMMARY:Orange County MBSE Workshop
DESCRIPTION:Join us for Inceptra’s and Dassault Systèmes Orange County Model-Based Systems Engineering MBSE Workshop\n  \n \n  \nModel-Based Systems Engineering (MBSE) is an engineering acronym that is often misconstrued and misapplied. Many companies struggle with understanding how it can improve their overall product lifecycle and help them navigate the increasing intricacies of their products. \nThe purpose of this workshop is to familiarize design engineers with MBSE. While primarily aimed at core mechanical design engineers\, the material should be easily comprehensible for design engineers across various domains. \nThrough a combination of interactive presentations and collective group exercises\, you will learn: \n\nWhat is Systems Engineering (SE) and the motives that drive it\nWhy MBSE over other Systems Engineering methodologies\nRole of simulation in MBSE\nLearn how MBSE can help your business\n\n  \nThis is a FREE EVENT – Register TODAY! \n  \nWhen: October 17\, 2023 \nMorning Session: 8:00 AM to 12:00 AM – Continental Breakfast  \nAfternoon Session: 12:30 PM to 4:30 PM – Lunch  \nWhat: Model Based Systems Engineering (MBSE) \nWhere: Sonesta Hotel – Irvine  \nSan Clemente Room \n17941 Von Karman Avenue\, Irvine\, CA 92614 \nDirections \nOrange County MBSE Workshop Agenda\n  \n\n\n\n\n\nTime \n\n\nTopic \n\n\nSpeaker \n\n\n\n\n8:00 AM – 8:15 AM \n\n\nCheck-in \n\n \n\n\n\n8:15 AM – 8:30 AM \n\n\nIntroduction and Welcome \n\n\nCraig Berger\, Inceptra \nBrian Haan\,Dassault Systèmes \n\n\n\n\n8:30 AM – 9:00 AM \n\n\nWhat is System Engineering? Why Model Based Systems Engineering? \n\n\nBrian Haan\,Dassault Systèmes \n\n\n\n\n9:00 AM –    11:00 AM \n\n\nBuilding and Applying MBSE Models \n\n\nBrian Haan\,Dassault Systèmes \n\n\n\n\n11:00 AM – 11:15AM \n\n\nFurther extending MBSE and Simulation into the development lifecycle \n\n\nBrian Haan\,Dassault Systèmes \n\n\n\n\n11:15 AM – 12:00 PM \n\n\nConclusions and Takeaways Group Conversations \n\n\nBrian Haan\,Dassault Systèmes \nCin’Quan Haney\, Inceptra \n\n\n\n\n \n  \n\nRegister Now!\nIn the area following Country* please include which Session you would like to participate in\, Morning or Afternoon.  
URL:https://inceptra.com/event/orange-county-mbse-workshop/
ATTACH;FMTTYPE=image/jpeg:/wp-content/uploads/2024/07/MBSE-OC-Workshop_pgbanner.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20230918T000000
DTEND;TZID=UTC:20230921T000000
DTSTAMP:20260404T235122
CREATED:20230905T175419Z
LAST-MODIFIED:20240919T192114Z
UID:10000029-1694995200-1695254400@inceptra.com
SUMMARY:2023 Global Product Data Interoperability Summit GPDIS
DESCRIPTION:Register for GPDIS this September 18-21\, 2023 in Phoenix\, AZ!\n  \n \n  \nRegister Now \n  \nThe Global Product Data Interoperability Summit (GPDIS) will be held in person at the Hilton Phoenix Resort at the Peaks in Phoenix\, AZ\, September 18-21\, 2023. \nThe GPDIS functions as a communications hub for industry principals to foster knowledge through the exchange of ideas\, solutions\, and methods. The range of process methods encompasses MBE\, MBD\, MBSE\, CAM\, product analysis\, emerging technologies\, and more. \nThe format maintains vendor neutrality but encourages all solution providers to actively demonstrate both their technologies and their success stories. Participants span from not only vendors and large OEMs\, but also lower-tier suppliers and family-owned manufacturing businesses. \nVisit Inceptra at booth 405 to learn more about Dassault Systèmes’ Model-Based Systems Engineering (MBSE) Solutions. \n  \nCheck out the AGENDA \n  \nDon’t miss Inceptra’s MBSE Presentation on End-to-End Electrical Engineering | Tuesday September 19\, 2023 from 4:20 – 5:00 PM  \nTo address the challenges posed by increased product complexity\, organizations require a comprehensive approach that ensures product quality. Implementing a Model-Based Systems Engineering (MBSE) end-to-end electrical solution enables customers to seamlessly design\, manage\, and also simulate their product development process with complete traceability. \nThis presentation will discuss the methodology for creating a virtual twin\, encompassing systems architecture\, wire harness development\, and various components such as requirements\, functional\, logical\, and physical definitions\, all managed within a unified platform. \nPresented by:\nJames Carr\, Sr. PLM Application Engineer\, Inceptra
URL:https://inceptra.com/event/2023-global-product-data-interoperability-summit-gpdis/
ATTACH;FMTTYPE=image/jpeg:/wp-content/uploads/2024/07/GPDIS-2023.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20230825T000000
DTEND;TZID=UTC:20230825T000000
DTSTAMP:20260404T235122
CREATED:20230714T173727Z
LAST-MODIFIED:20240919T192114Z
UID:10000030-1692921600-1692921600@inceptra.com
SUMMARY:2023 Wichita CATIA RUG Aerospace & Defense
DESCRIPTION:Register for the 2023 CATIA Regional Users Group this\nAugust 25\, 2023 in Wichita\, KS!\n  \n \n  \nJoin us for the Aerospace & Defense Day of the 2023 Wichita CATIA Regional Users Group (RUG). This RUG will be focused on Wichita and surrounding companies using CATIA and the 3DEXPERIENCE® platform. We will have speakers from local companies\, as well as technical educational sessions from Dassault Systèmes and Inceptra. \nCome together to spark conversations\, meet\, network\, and learn from other expert users of CATIA in your community.   \n  \nThis is a FREE EVENT – Register TODAY! \n  \nWhen: August 25\, 2023 \nTime: 7:15 AM to 12:00 PM CT \nWhat: Engineering Design and Suppliers | Aerospace & Defense \nWhere: NIAR – WSU Tech North Campus \nNational Center for Aviation Building \n4004 N Webb Rd\, \nWichita\, KS 67226 \nDirections   \n  \n2023 Wichita CATIA RUG Aerospace & Defense Agenda\n  \nAugust 25\, 2023\nEngineering\, Design\, and Suppliers  |  Aerospace & Defense\n  \n\n\n\n\n\nTime \n\n\nSession \n\n\nSpeaker \n\n\n\n7:15 AM – 8:00 AM\nCheck-in\n \n\n\n8:00 AM – 8:15 AM\nRUG Introduction and Welcome\nCade Heiberg / Rodolphe Destouches\, Dassault Systèmes\n\n\n8:15 AM – 8:45 AM\n\nSession 1: \n3DEXPERIENCE Platform Overview \n\nRoger Joyal\, Dassault Systèmes\n\n\n8:45 AM –    9:30 AM\n\nSession 2: \nSpiritONE Digital Transformation Overview \n\nChad Ross\, Spirit Aerosystems\n\n\n9:30 AM – 10:15AM\n\nSession 3: \nSupplier Integration – Build to Print use of 3DEXPERIENCE \n\nDrew Hallford / Justin Brooks\, Inceptra\n\n\n10:15 AM – 10:30 AM\nBreak\n \n\n\n10:30 AM – 11:15 AM\n\nSession 4: \nStructural Engineering \n\nEtienne Ardouin\, Dassault Systèmes\n\n\n11:15 AM – 12:00 PM\n\nSession 5: \nV5 to 3DEXPERIENCE \n\nChris DeVries\, Dassault Systèmes\n\n\n\n\n  \nDon’t miss Inceptra’s Technical Briefing  \n9:30 am – 10:15 am: \nSupplier Integration – Build to Print use of 3DEXPERIENCE\nThis session will focus on the tools provided by the 3DEXPERIENCE to streamline the exchange of product engineering data between your organization and your customer network.  It will demonstrate the process of connecting\, retrieving\, and delivering a technical data package in real time on the 3DEXPERIENCE platform. You will learn how 3DEXPERIENCE can help you work efficiently with OEMs to meet your manufacturing contract requirements and deliverables. \nPresented by:\nJustin Brooks\, PLM Application Engineer\, Inceptra and\nDrew Hallford\, Application Engineer Inceptra\n  \nRegistrations are now closed.  \nWe look forward to seeing you there!   \n  \n\n 
URL:https://inceptra.com/event/2023-wichita-catia-rug-aerospace-defense/
ATTACH;FMTTYPE=image/jpeg:/wp-content/uploads/2024/07/2023-Wichita-RUG-Aerospace-Defense_pgbanner.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20230824T000000
DTEND;TZID=UTC:20230824T000000
DTSTAMP:20260404T235122
CREATED:20230616T140043Z
LAST-MODIFIED:20240919T192115Z
UID:10000031-1692835200-1692835200@inceptra.com
SUMMARY:Inceptra Customer Appreciation Golf Outing 2023 – Kansas
DESCRIPTION:  \n \n  \nTo express our appreciation\, Inceptra and Dassault Systèmes invite customers to join us for the 2023 Inceptra Customer Golf Outing in Wichita: \n  \nAuburn Hills Golf Course\nWichita\, Kansas\nThursday\, August 24\, 2023\n  \n9:00 am Registration \n10:00 am Shotgun Start – Scramble Format \nLunch Served & Prizes Awarded Following Golf Game \n  \nRegistrations are now closed. \nTo those that registered\, we look forward to seeing you there! \n  \nAuburn Hills Golf Course\n443 S. 135th St. W.\nWichita\, Kansas 67235\nP (316) 219-9700 \nDirections \n  \n  \n 
URL:https://inceptra.com/event/inceptra-customer-appreciation-golf-outing-2023-kansas/
ATTACH;FMTTYPE=image/jpeg:/wp-content/uploads/2024/07/Inceptra-Golf-Outing_2023.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20230823T000000
DTEND;TZID=UTC:20230823T000000
DTSTAMP:20260404T235122
CREATED:20230713T215845Z
LAST-MODIFIED:20240919T192114Z
UID:10000032-1692748800-1692748800@inceptra.com
SUMMARY:2023 Wichita CATIA RUG MBSE
DESCRIPTION:Register for the 2023 CATIA Regional Users Group thisAugust 23\, 2023 in Wichita\, KS!\n  \n \n  \nJoin us for the Model Based Systems Engineering (MBSE) day of the 2023 Wichita CATIA Regional User Group (RUG). This RUG will be focused on Wichita and surrounding companies using CATIA and the 3DEXPERIENCE® platform. We will have speakers from local companies\, as well as technical educational sessions from Dassault Systèmes and Inceptra. \nCome together to spark conversations\, meet\, network\, and learn from other expert users of CATIA in your community.    \n  \nThis is a FREE EVENT  \n  \nWhen: August 23\, 2023 \nTime: 12:00 PM to 5:30 PM CT \nWhat: Model Based System Engineering (MBSE) \nWhere: NIAR – WSU Tech North Campus \nNational Center for Aviation Building \n4004 N Webb Rd\, \nWichita\, KS 67226 \nDirections   \n  \n2023 Wichita CATIA RUG MBSE Agenda\n  \nAugust 23\, 2023\nModel Based Systems Engineering – MBSE \n  \n\n\n\n\n\nTime \n\n\nSession \n\n\nSpeaker \n\n\n\n12:00 PM – 12:45 PM\nCheck-in\n \n\n\n12:45 PM – 1:00 PM\nRUG Introduction and Welcome\nCade Heiberg /Rodolphe Destouches\, Dassault Systèmes\n\n\n\n1:00 PM –  1:45 PM \n\n\nSession 1: \nMBSE introduction \n\nKushal Koirala\, Dassault Systèmes\n\n\n1:45 PM –    2:45 PM\n\nSession 2: \nMBSE Electrical \n\nZhen Yang\, Dassault Systèmes\n\n\n3:00 PM – 3:45 PM\n\nSession 3: \nMBSE at Textron Defense (US Citizen Only) \n\nStephen Palmer\, Textron Defense\n\n\n3:45 PM –  4:30 PM\n\nSession 4: \nMBSE at Spirit Aerosystems \n\nChris Aberle\, Spirit Aerosystems\n\n\n4:30 PM –  5:30 PM\nNetworking\n \n\n\n\n\n  \nRegistrations are now closed.  \nWe look forward to seeing you there!   \n  \n\n \n 
URL:https://inceptra.com/event/2023-wichita-catia-rug-mbse/
ATTACH;FMTTYPE=image/jpeg:/wp-content/uploads/2024/07/MBSE-RUG.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20230817T000000
DTEND;TZID=UTC:20230817T000000
DTSTAMP:20260404T235122
CREATED:20230814T145128Z
LAST-MODIFIED:20240919T192114Z
UID:10000033-1692230400-1692230400@inceptra.com
SUMMARY:The 3DEXPERIENCE Platform enables Faster Vehicle Builds
DESCRIPTION:Learn how the 3DEXPERIENCE® platform revolutionizes the vehicle development process through a model-based framework.\nThis approach enables smooth data flow across disciplines\, empowering true simulation-driven design. \nSimulation is vital for vehicle development\, ensuring performance and quality. Multiple design-simulation iterations refine optimal choices. Yet\, data\, personnel\, and tool gaps lead to subpar outcomes\, eroding confidence\, and costly late-stage issue discovery. \n 
URL:https://inceptra.com/event/the-3dexperience-platform-enables-faster-vehicle-builds/
ATTACH;FMTTYPE=image/jpeg:/wp-content/uploads/2024/07/Faster-Vehicle-Model-Build-on-the-3DEXPERIENCE-Platform_pgbanner.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20230816T000000
DTEND;TZID=UTC:20230816T000000
DTSTAMP:20260404T235122
CREATED:20230615T190621Z
LAST-MODIFIED:20240919T192115Z
UID:10000034-1692144000-1692144000@inceptra.com
SUMMARY:Inceptra Customer Appreciation Golf Outing 2023 – Michigan
DESCRIPTION:Emily Tousignant Memorial Golf Day\n \n  \nAfter a pandemic induced hiatus\, we are thrilled to bring back our annual golf outing in Michigan!  To express our appreciation\, Inceptra and Dassault Systèmes invite customers to join us for the 2023 Inceptra Customer Golf Outing to be held at: \n  \nMoose Ridge Golf Course\nSouth Lyon\, Michigan\nWednesday\, August 16\, 2023\n  \n8:00 am Continental Breakfast \n9:00 am Shotgun Start – Scramble Format \nLunch Served & Prizes Awarded Following Golf Game \n  \nRegistrations are now closed. \nTo those that registered\, we look forward to seeing you there! \n  \nMoose Ridge Golf Course\n11801 Doane Road\nSouth Lyon\, Michigan 48178\nP (248) 446-9030 \nDirections \n  \n\n  \n 
URL:https://inceptra.com/event/inceptra-customer-appreciation-golf-outing-2023-michigan/
ATTACH;FMTTYPE=image/jpeg:/wp-content/uploads/2024/07/Inceptra-Golf-Outing_2023.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20230722T000000
DTEND;TZID=UTC:20230723T000000
DTSTAMP:20260404T235122
CREATED:20230718T140013Z
LAST-MODIFIED:20240919T192114Z
UID:10000035-1689984000-1690070400@inceptra.com
SUMMARY:Vertical Flight Society's 17th Annual Electric Aircraft Symposium
DESCRIPTION:Register for the 17th Annual Electric Aircraft Symposium this July 22-23\, 2023 in Oshkosh\, WI!\n  \n \n  \nRegister Now \n  \nThe Vertical Flight Society’s 17th Annual Electric Aircraft Symposium will be held in person at the University of Wisconsin Oshkosh’s Culver Family Welcome Center in Oshkosh\, WI\, July 22-23\, 2023. \nThe 17th Annual Electric Aircraft Symposium is the premier electric VTOL/ STOL/ CTOL and Advanced Air Mobility (AAM) event. Plan to come early and learn the latest from over 40 experts on electric aviation! \nVisit Inceptra at table 3 to learn more about Dassault Systèmes’ “Reinvent the Sky”\, an industry-specific software solution to accelerate the product development of VTOL aircrafts. \n  \nCheck out the AGENDA \n  \nDon’t miss Inceptra’s Electric Aircraft Technical Briefing \nJuly 23\, 2023 | 4:00 pm – 4:30 pm \nAccelerating VTOL Aircraft Development from Concept to Certification\nLearn about the Dassault Systèmes “Reinvent the Sky” solution. An industry solution experience within the 3DEXPERIENCE® platform that speeds up the VTOL development cycle with the ability to model\, analyze\, simulate\, certify\, and experience the VTOL vehicle in a virtual environment. \nIt enables enhanced collaboration and communication across all disciplines while at the same time minimizing IT-related expenses. \nAccelerate the time from concept to prototype with less IT hardware and staff by leveraging a single platform on the cloud to eliminate development inefficiencies and ensure product quality\, providing full data traceability for certification. \nPresented by:  Dan Dunne\, Vice President Engineering\, Inceptra\n  \nRegister Now \n 
URL:https://inceptra.com/event/vfs-17th-annual-electric-aircraft-symposium/
ATTACH;FMTTYPE=image/jpeg:/wp-content/uploads/2024/07/2023-Annual-Electric-Aircraft-Symposium.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20230621T000000
DTEND;TZID=UTC:20230621T000000
DTSTAMP:20260404T235122
CREATED:20230606T220737Z
LAST-MODIFIED:20240919T192115Z
UID:10000036-1687305600-1687305600@inceptra.com
SUMMARY:WEBINAR: Easily Shift from Traditional MedTech Product Design to Modeling and Simulation
DESCRIPTION:LIVE WEBINAR\n  \nUnified Modeling and Simulation (MODSIM) is providing a new paradigm for MedTech product design \nCurrent MedTech product design methods struggle to meet the demand for rapid\, safe\, and effective therapeutic solutions that pass regulatory scrutiny. The FDA has been promoting the use of Computational Modeling & Simulation (CM&S) to address this challenge. \nHowever\, obstacles remain in fully harnessing CM&S due to regulatory processes and barriers faced by medical device manufacturers\, such as legacy processes\, vendor selection\, and implementation decisions. \n  \n \n  \nJune 21\, 2023   |   10:00 am – 11:00 am ET\nRegister Now \n  \nIn this presentation\, learn how to easily implement a virtual (in silico) MODSIM approach. This will help to better manage the conflicting needs for usability\, manufacturability\, and cost in MedTech product design engineering and validation process. \n\nSee the power of Modeling and Simulation (MODSIM) to dramatically optimize design performance and speed development of innovative medical devices\nLearn how MODSIM builds on the concept of “left-shifting” to increase the impact of simulation on engineering and design\nHear an example of designing a drug delivery combination device and discover how designers\, engineers\, and analysts are able to\ncollaborate on making performance-based decisions to validate optimal designs against regulatory requirements and business objectives\n\n  \nRegister Now \n 
URL:https://inceptra.com/event/webinar-easily-shift-from-traditional-medtech-product-design-to-modeling-and-simulation/
ATTACH;FMTTYPE=image/jpeg:/wp-content/uploads/2024/07/Webinar_Easily-Shift-from-Traditional-MedTech-Product-Design-to-Modeling-and-Simulation.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20230615T000000
DTEND;TZID=UTC:20230615T000000
DTSTAMP:20260404T235122
CREATED:20230517T154746Z
LAST-MODIFIED:20240919T192152Z
UID:10000037-1686787200-1686787200@inceptra.com
SUMMARY:SEMINAR:  What’s New in Product Development Software | Montréal\, QC
DESCRIPTION:Discover the New Technology Available in Dassault Systèmes’ Product Development Software\n  \nJoin us for an in-person event to learn about the latest capabilities in Dassault Systèmes’ software solutions that support your evolving product development needs – from design and simulation to manufacturing and product lifecycle management (PLM). \n  \n \n  \nJune 15\, 2023   |   1:00 pm – 5:00 pm ET\nFollowed by Networking Reception – REGISTER BELOW\n  \nDiscover how the impossible has become possible in the last few years. See how Dassault Systèmes’ ever more powerful and easy-to-use applications and 3DEXPERIENCE platform can elevate your product development efficiency and innovation to the next level. Also get the opportunity to network with your peers and experts from Inceptra and Dassault Systèmes. \n  \nThis seminar will provide insights and demonstrate the latest capabilities and enhancements to: \n  \n[TABS_R id=21928] \n  \nDATE:   June 15\, 2023 \nTIME:   1:00 pm to 5:00 pm ET \nLOCATION:   Dassault Systèmes \nADDRESS: \n393 Saint-Jacques\, #300\, Room Armand Bombardier\, Montréal\, QC H2Y 1N9 \nAGENDA: \n1:00 pm – 1:15 pm        Registration \n1:15 pm – 5:00 pm        Presentations & Demonstrations \n5:00 pm – 7:00 pm        Networking – Appetizers & beverages will be served \n  \n\n  \nRegister Now!
URL:https://inceptra.com/event/seminar-whats-new-in-product-development-software-montreal-qc/
ATTACH;FMTTYPE=image/jpeg:/wp-content/uploads/2024/07/The-Top-7-Reasons-Why-SmarTeam-Customers-Upgrade-to-the-3DEXPERIENCE-Platform_pgbanner.jpg
END:VEVENT
END:VCALENDAR